DESCRIPTION:

AT6000 series spectrum analyzer have exceed 1GHZ frequency (0.15 ~1050MHZ) 50MHZ step frequency and fine adjust to the center frequency, compose the convenient frequency-domain test.AT6011 have the tracking signal generator

§ Frequency range:0.15～500MHz

§ Stability:±10ppm / year

§ Aging: ±2ppm each year

§ Resolution of frequency display:10kHz（5 digit）

§ Readout accuracy: ±2%* sweepwidth+5*10-3* CF+10kHz

§ CF adjustment range:0 .15～500MHz

§ Frequency synthesize:TCXO，DDS

§ Sweep width range: zero steps and 1�500MHz (1-2-5 steps)

§ Sweep Width accuracy: ±10%

§ Resolution Bandwidth:400kHz 、20kHz

§ Video-Filter Bandwidth:4kHz

§ Sweep time:20ms

§ Amplitude Specifications 0.15～500MHz

§ Range: -100dBm～+13dBm

§ Display: CRT，8*10div

§ Display calibration:10dB/div，logarithmic

§ Display range:80dB（10 dB/div）

§ Amplitude Frequency Response

§ 10 dB Attenuation，Zero Step，Resolution Bandwidth

§ 400kHz，Signal -17 dBm:＜±4 dB

§ LCD Display:2*16，Center frequency，Sweep frequency width，Reference Level

§ Accuracy（Input attenuation）:≤±2dB/10dB

§ Reference level range:-27 dBm～+13 dBm(each 10dB)

§ Accuracy:（Reference level）250MHz（CF），Zero step，RBW400kHz:±2 dB

§ Average noise level:≤-90 dBm（RBW20kHz VBW4kHz）

§ Third order intermod.:at -27dBm two signal >3MHz apart:≤-60 dBc

§ 2nd harmonic suppression:-27 dBm，0 dB attenuation，≤-50 dBc

§ VSWR （Attenuation≥10 dB）:typ. 1.5:

Technical parameters:
Frequency
Frequency range 9 kHz to 3.02 GHz
Minimum frequency resolution of 100Hz
Span range of 100 Hz / div to 300 MHz / div 1,2,5 stage of choice
(Automatic), ZERO Span, FULL Span (9 kHz to 3.0 GHz)
Frequency Selection Start, Stop, Center, Span set
Span designated Span accuracy of ± 3% range
Read out accuracy Span accuracy + Frequency Standard Accuracy + RBW 50%
Phase noise ≤ -90 dBc / Hz (10 kHz to Off set date)

Range
Range + 20 dBm ~ - 125 dBm (built: pre-amplifier)
The average noise level (1 kHz RBW, 10 Hz VBW state)
≤ -125 dBm: 150 kHz ~ 1 GHz
≤ -100 dBm: 1 GHz ~ 2.4 GHz, 50 kHz ~ 150 kHz
≤ -95 dBm: 2.4 GHz ~ 3 GHz
Amplitude units in dBm, dBmV, dBuV, V, mV, uV, W, mW, uW
Frequency response (0 dB attenuation of the base) -3.5 ~ 1.5 dB (100 kHz ~ 10 MHz)
± 1.5 dB (10 MHz ~ 3 GHz)
Reference level (Level) measurement range: -90 dBm to + 20 dBm
0.1 dB resolution stage
Accuracy of ± 1.5 dB
2nd harmonic distortion ≤ -60 dBc, -40 dBm input
Intermodulation Distortion ≤ -70 dBc, -40 dBm input
Remaining parasitic ≤ -85 dBm (input terminated 0 dB attenuation)
Other input parasitic ≤ -60 dBc, -30 dBm input
Resolution bandwidth of 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz,
300 kHz, 1 MHz, 3 MHz / 9 kHz, 120 kHz
Accuracy of ± 20%
Select degree of 60 dB / 3 dB ratio <15: 1
60 dB / 6 dB ratio <12: 1 (9 kHz, 120 kHz)
Choice of error ≤ ± 1.0 dB (1 kHz Reference RBW)
Video bandwidth 10 Hz to 3 MHz in 1-3-10 steps

Scan
Scan time 100 ms to 1000 sec,
40 ms to 1000 sec (Zero Span)
Accuracy of ≤ ± 20%
Trigger Source Trigger source External (rear), Video, Freerun, Line
Trigger Mode Trigger Mode continuous, single
Trigger Level Trigger Level TTL level

Store
Waveform memory up to 900
Settings are stored up to 3000

Screen display
Screen Type 6.4 "Color TFT LCD screen
Display Resolution 640 (H) x 480 (V) the actual display area
Marker peak search mode, Delta marks, center marks,
Tag tag tracking reference (SPAN scope) (up to 8)
RF Input Connector N Type Female, 50 Ω nominal
VSWR 150 kHz to 3.0 GHz, VSWR <1.5: 1
(0 dBm Reference Level to date)
Maximum input level 0 Vdc, +20 dBm
Standard frequency (10MHz, Ref):
Temperature stability of ± 0.5 ppm
Aging ± 0.5 ppm / Year
BNC female connector
Input level -5 dBm to +15 dBm
Output level 10 MHz, +8 dBm nominal nominal value
COM port RS-232C
Printer interface LTP / USB
USB interface to support 1.1, 2.0, image file to support the GIF format
Support of the state of preservation, support for track preservation

General configuration:
Dimensions 375 (L) x 350 (W) x 195 (H) mm
About 10 kg weight
Warm-up time for the accurate determination of continuing to carry out more than 20 minutes
Power 100-240 VAC at 50 / 60Hz
Power consumption 80 watts maximum (there is no built-in option)
Operating Temperature 0 ℃ to 40 ℃
Storage temperature - 20 ℃ to 70 ℃

Options:
☆ Tracking Generator (100KHz ~ 3GHz)
☆ CDMA signal generator option
☆ Instruments GPIB interface table (IEE 488 USB)
☆ Ethernet remote control interface corresponds to the Internet
☆ Socket equipment return loss bridge

Description:

AT5000 series spectrum analyzer will exceed 1Ghz(0.15~1050MHz) have the glancing or fine adjust center frequency with the 100KHz/grid~100MHz/grid span select, compose the simple frequency-domain. One 4 and 1/2 bit LED display can be selected for the center frequency and marking frequency reading.AT5011+have a tracking generator, this instrument can be used to the pre-research testing. can detect the mobile phone’s RF circuit’s native signal, intermediate frequency, radiation signal etc. the spectrum analyzer is used to examine and repaired that mobile phone can’t going the web, very conveniently and exactly.

Specification:

• Frequency range: 0.15~1050MHz
• 4 and 1/2 digital displays. (Center frequency, 0.1MHz resolution)
• -100~+13dBm amplitude range, 20MHz, 400MHz center frequency span and 4 KHz video filter.
• Tracking generator (only the ATTEN5011+)
• Output amplitude :+0~-50dBm(50Ω)
• Frequency range: 0.15 to 1050MHz
• Center frequency display accuracy: ±100kHz
• Marker accuracy: 0.1% spans 100 kHz
• Resolution of frequency display: 100 kHz (4.5 digit LE)
• Frequency scans width accuracy: ±10%
• Frequency stability: better than 150 kHz/ hour
• IF Bandwidth (-3dB): 400 kHz and 20 kHz;
• Video-Filter (ON): 4 kHz
• Sweep rate: 43Hz
• Amplitude range: -100dBm to +13dBm
• Screen display range: 80dB (10dB/div.)
• Reference level: -27dBm to +13dBm (in 10dB steps)
• Reference level accuracy: ±2dB
• Average noise level: -90dBm (20 kHz Bandwidth)
• Distortion: < -55dBc of 2nd and 3rd harmonic
• Third order intermod.: -70dBc (two signals > 3MHz apar
• Sensitivity: Better than -90dBm
• Log scale fidelity: ±2dB (without attn.) 500MHz
• Input attenuator: 0 to 40dB (4×10dB steps)
• Input attenuator accuracy: ±1dB/10dB
• Max. Input level: +10dBm, ±25V DC (0dB attn.) +20dBm (40dB attn.)
• Frequency scans width: 100 kHz/div. to 100MHz/div, in 1-2-5 steps and 0Hz/div. (Zero Scan)

AT6000 series spectrum analyzer have exceed 1GHZ frequency (0.15 ~1050MHZ) 50MHZ step frequency and fine adjust to the center frequency, compose the convenient frequency-domain test.

Frequency range: 0.15～1050MHz

§ Stability:±10ppm/year

§ Aging: ±2ppm each year

§ Resolution of frequency display:10kHz（5 ½ digit）

§ Readout accuracy: ±2%* sweepwidth+5*10-3* CF+10kHz

§ CF adjustment range: 0 .15～1050MHz

§ Frequency synthesize: TCXO，DDS

§ Sweep width range: zero steps and 1�1000MHz (1-2-5 steps)

§ Sweep Width accuracy: ±10%

§ Resolution Bandwidth:400kHz 、20kHz

§ Video-Filter Bandwidth:4kHz

§ Sweep time:20ms

§ Amplitude Specifications 0.15～1050MHz

§ Range: -100dBm～+13dBm

§ Display: CRT，8*10div

§ Display calibration:10dB/div，logarithmic

§ Display range:80dB（10 dB/div）

§ Amplitude Frequency Response

§ 10 dB Attenuation，Zero Step，Resolution Bandwidth

§ 400kHz，Signal -17 dBm:＜±4 Db

§ LCD Display:2*16，Center frequency，Sweep frequency width，

§ Reference Level Accuracy（Input attenuation）:≤±2dB/10dB

§ Reference level range:-27 dBm～+13 dBm(each 10dB)

§ Accuracy:（Reference level）500MHz（CF），Zero step，RBW400kHz:±2 dB

§ Average noise level:≤-90 dBm（RBW20kHz VBW4kHz）

§ Third order intermod.: at -27dBm two signal >3MHz apart:≤-60 dBc

§ 2nd harmonic suppression:-27 dBm，0 dB attenuation，≤-50 dBc

§ VSWR （Attenuation≥10 dB）:typ. 1.5:1

§ Input/output

§ Signal input: N connector

§ Impedance:50Ω

§ Max. Continuous RF input level:10～40 dB attenuation:+20 dBm （0.1W） 0 dB
attenuation:+10 dBm

§ Max. DC input voltage:±25V

§ DC Output: DC power supply 6VDC FOR AZ530 Probe

§ Audio output:3.5mmφ，speaker connector

§ Turning knob control: Center frequenc

AT6011 Spectrum Analyzer is a low cost, high performance digital synthesized RF measurement instrument with Tracking Generator and frequency upto 1GHz. It uses VCO phase locked technique. It is rugged and easy to control operating panel. It’s the most stable Spectrum Analyzer you can find with good noise floor performance.

Product Description:

AT5005 /AT 5006 is the perfect instrument for analyzing any kind of signal within the frequency range of 150KHz to 500MHz, and is best suited for meeting the RF measurement needs of education and industry.

Features:

•Frequency Range: 150KHz to 500MHz

•4½ Digit Display: Centre & Marker Frequency,

•0.1MHz Resolution

•Amplitude Range: -100dBm to +13dBm

•Filters: 20KHz, 250KHz & Video Filter.

•Output Power: +1dBm to -50dBm (50 ohms)

•Built-in Tracking Generator: 0.15MHz to 500MHz (Only for Model AT5006)

Models:

•AT5005 500MHz Standard Model

•AT5006 500MHz with Tracking Generator

Technical Specifications:

ATTEN AT5011+ Spectrum Analyzer 150KHz to 1GHz Tracking

Product Description:

AT5010 /AT5011 is the perfect instrument for analyzing any kind of signal within the frequency range of 0.15 to 1050 MHz, and is best suited for meeting the RF measurement needs of education and industry.


Features:

Frequency Range: 150KHz to 500MHz

4? Digit Display: Centre & Marker Frequency,

0.1MHz Resolution

Amplitude Range: -100dBm to +13dBm

Filters: 20KHz, 250KHz & Video Filter.

Output Power: +1dBm to -50dBm (50 ohms)

Built-in Tracking Generator: 0.15MHz to 1050MHz (Only for Model AT5011+)


Models:

AT5010 1GHz Standard Model

AT5011+ 1GHz with Tracking Generator

Frequency range: 0.15~1050MHz

• 4 and 1/2 digital displays. (Center frequency, 0.1MHz resolution)
• -100~+13dBm amplitude range, 20MHz, 400MHz center frequency span and 4 KHz video filter.
• Tracking generator (only the ATTEN5011+)
• Output amplitude :+0~-50dBm(50ω)

Specification:

• Frequency range: 0.15 to 1050MHz
• Center frequency display accuracy: ±100kHz
• Marker accuracy: 0.1% spans 100 kHz
• Resolution of frequency display: 100 kHz (4.5 digit LED)
• Frequency scans width accuracy: ±10%
• Frequency stability: better than 150 kHz/ hour
• IF Bandwidth (-3dB): 400 kHz and 20 kHz;
• Video-Filter (ON): 4 kHz
• Sweep rate: 43Hz
• Amplitude range: -100dBm to +13dBm
• Screen display range: 80dB (10dB/div.)
• Reference level: -27dBm to +13dBm (in 10dB steps)
• Reference level accuracy: ±2dB
• Average noise level: -90dBm (20 kHz Bandwidth)
• Distortion: < -55dBc of 2nd and 3rd harmonic
• Third order intermod.: -70dBc (two signals > 3MHz apart)
• Sensitivity: Better than -90dBm
• Log scale fidelity: ±2dB (without attn.) 500MHz
• Input attenuator: 0 to 40dB (4×10dB steps)
• Input attenuator accuracy: ±1dB/10dB
• Max. Input level: +10dBm, ±25V DC (0dB attn.) +20dBm (40dB attn.)
• Frequency scans width: 100 kHz/div. to 100MHz/div, in 1-2-5 steps and 0Hz/div. (Zero Scan)